Reproduce selection from a fixture to an other

Hi,
it would be interesting to be able to reproduce an order of selection from a fixture on one or several others. For example I have 100 Magic Panels 602 with 36 leds RVBW each, Leds are now numbered from X.1 to X.36, so if I make a spécial order sélection in fixture 1(1.1 to 1.36) it would be interesting to be able to reproduce this order on the 99 other fixtures without having to select leds one by one.

Thanks
Best

Comments

  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    Hello,

    Does compound fixture User Numbers help with this?
  • stephlightstephlight Registered User
    Hello, I don't think so.
    I have not found a new feature to reproduce a selection in a compound fixture, whatever is the selection, on one or more other compound fixture(s)

    thanks
  • srautanesrautane Registered User, Hog Beta
    Only way to get close is make a selection like 1 > 100.2 +.5 + .10 + .17 etc.
  • stephlightstephlight Registered User
    thanks sautrane for your answer.
    When you have 200 Magicpanel so 7200 compound fixtures ( 21600 fixtures in RVB mode or 28800 in RVBW), it's a bit too long ;-) it would be interesting to make a sélection in a compound fixture and copy it on others.
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    Sorry, I read this wrong. I understand now what you are looking for and I will get a request opened for this
  • stephlightstephlight Registered User
    Thanks!!
  • srautanesrautane Registered User, Hog Beta
    Steph, I understand what you mean and it would be nice to be able to record and copy different kind of selections.
    But, IMO using lateral selection doesn't make command line very long. It is just as long as the amount of cells in one fixture and even if you have the possibility copy the selection, you have to make the selection.
    So when you have 200 panels only one thing changes 1 > 200.2 +.5 + .10 + .17 That selects cells 2,5,10 and 17 in all panels between 1 and 200. Or is there something I don't quite understand?
  • stephlightstephlight Registered User
    edited December 2015
    This is not what I want to do. With your way, the order selection would be in first all the .2 then all the .5 then all the .10 then all the .17. I will always be dependent on the order of fixtures numbers. what is important is the selection order in the origin compoundt fixture and the selection order of the compound fixtures of destination.What I want is to copy the selection order of the cells of a compound fixture on others compound fixtures taking into account the order of selection of the compound fixtures of destination.

    Not sure that I'm clear so :

    1---2---3---4
    5---6---7---8
    9--10-11-12
    13-14-15-16

    I want to be able to copy the selection order of cells of compound fixture 1 on cells of compound fixtures 1, 2, 3, 4, 8, 12, 16, 15, 14,13, 9, 5, 6, 7, 11, 10.
    So the final selection order would be :
    1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3,, 4.1, 4.2, 4.3,, 8.1, 8.2, 8.3, 12.1, 12.2, 12.3, 16.1, 16.2, 16.3, 15.1, 15.2, 15.3, ......... 10.1, 10.2, 10.3

    Is it more clear?
  • srautanesrautane Registered User, Hog Beta
    Yes it is. Thanks for clarifying this. I didn't notice the selection order of the master fixtures, which truly makes the selection a bit tricky :)
  • cormacjackcormacjack Registered User, DL Beta
    +1
    Would be great if you could use a group palette as the master/template for other compound fixtures.
  • ShrunkenNedShrunkenNed Registered User, Hog Beta
    In the meantime, how about making a "Template" plot view whereas all 200 of the .1 are stacked on top of each other, same with all the .2, .3, etc. Would at least help with selections, but I agree doesn't help with Copying timing.
Sign In or Register to comment.