"ArtNet In" Macro

BenwinBenwin Registered User, Hog Beta
It would be nice if it was possible to activate/deactivate "ArtNet in" settings via Macros without using screen touches.

B

Comments

  • ShrunkenNedShrunkenNed Registered User, Hog Beta
    +1
  • Sander_de_GraafSander_de_Graaf Registered User, Hog Beta
    edited September 2015
    Yes, +1
    SU 1/0 : Set Universe 1 to disable
    SU 1/1 : Set Universe 1 to Hognet
    SU 1/2 : Set Universe 1 to Artnet
    SU 2/1/1 : Set Universe 1 of DP8k with netnumber 2 to Hognet

    Something like that!
  • jonathanbandlijonathanbandli Registered User
    yes +1
  • M.VrankenM.Vranken Registered User, Hog Beta
    +1
  • M.VrankenM.Vranken Registered User, Hog Beta
    It would be nice to have to Trigger a comment macro over Artnet-In like the Midi-In...
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    I get a request logged for this.
  • Strobie1Strobie1 Registered User
    The work around for this in the mean time is to create a comment macro that opens the dmx window, then selects the channels or outputs and sets them to art net in.

    I have explained this process in detail in the hog 4 user group.

    With some crafty editing of the macro after you have done recording it, you can get it to accuse this fast with the press of one button, setting individual channels or entire outputs or dps to art net in or hog net.
  • Strobie1Strobie1 Registered User
  • ShrunkenNedShrunkenNed Registered User, Hog Beta
    edited June 2016
    Thanks Strobie1,
    The problem I always run into is selecting all 512 Dmx channels. Macros don't record screen drags. 512 DMX channels always are longer than the DMX window and need to scroll down to capture all of them.
    -So the macro needs a bunch of Pig+Down arrows if I recall. (makes a lengthy macro just in the selection steps)
    -Plus, you cannot set the Pig+Down arrow time too short or it'll fail.
    -If you want to select more than 1 universe, Make sure you start with Universe 1 selected for first part of macro, then tap pull down, then tap universe 2. IF you don't set the initial start as 1, with the scroll bar all the way at the top, it'll jump around and not select universes in order.
    -I tried making macros of each individual universe and then creating a macro to do all 8, but at the time, embedded macros were not allowed.

    - And of course, because this whole macro workaround is dependent on touchscreens, this only works on the same 'Type' of console. You can create it on a Hog PC, but if you want to run it on a Full Boar, you have to recreate the macro from scratch.

Sign In or Register to comment.