Hog 4 PC playback delay

I have a hog 4 PC system running v3.0.0 and I recently had to put it in a new computer. I have noticed that if the software is running for an extended time period (a couple hours) that playback becomes delayed. I'll press play on a main cue stack and the console will hold for a second or two and then "catch up". If I log off and log back in, there are no playback issues. It's like the console is buffering.

Any thoughts?

0 roonie72 - Former HES Forum Member over 7 years ago

Hi did you ever get to the bottom of this issue I'm having the same problem
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Kurt over 4 years ago

Hey, same problem here but it isn't PC, it's a road hog 4 running v3.12 b2351. It seems very consistent as to when the delay happens too. If I press play on a playback in one second intervals it lags up about every 3-4 seconds for a couple seconds at a time. Same lag applies across the board with playbacks, whether it's a cue, page change, or choose key function.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 mitch - Former HES Forum Member over 4 years ago

Hello, if Artnet is not being used, try disabling the Artnet outputs.
Open the Network window, highlight the DP8000 and press the Settings button at the top of the window.
In the Settings window select the Artnet Outputs tab.
On the right press the X to disable each output.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Kurt over 4 years ago

It was not ArtNet! Similar issue though, with OSC on but not being used the console was getting caught up with timeouts. ArtNet output has been enabled, but does not appear to be causing an issue.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel