[CRASH] Wholehog 3 BLUE FLASHING, NO LOGO, 1 RED LED FLASHING

I have wholehog 3 with 3.2.5 version and suddenly cannot start. No Logo, No display, and have some blue led flashing.
I opened the keyboard cover and I found there are blue led flashing (under the 'choose' button) and there is 1 red LED is flashing, the red led that stand alone(there are 2 couples and 1 alone, total 5 red led when start).

I emailed the support from highend and I followed their procedure.
First, I checked the PSU Distribution, 5v,12v,13.7v are fine, but i didn't see 3v.
He said that the system board not connected with the front board.

What should I do next? I hope someone would tell me what is broken.

Comments

  • This is most likely and issue with the front panel PCB not communication to the main processor PCB (motherboard).

    I would consider sending the console in for eval. and repair. Consider repair costs. due to the cost of the Front panel PCB or Main Processor PCB, you could be better of replacing with a HOG 4 Series console.
Sign In or Register to comment.