Console power requirements

LeggyLeggy Registered User, Hog Beta
According to the manual, Roadhog and Full Boar each draw 500w but the Hog 4 only draws 300w.

Is this correct?

Leggy.

Comments

  • These are compliance numbers.

    The H4 uses a supply with a max power draw of 300W. We do not draw 300W.
    The RH4 and FB4 both use supplies with a max power draw of 500W. We do not draw 500W.
  • LeggyLeggy Registered User, Hog Beta
    edited January 2015
    Thank you Paul.
    So what should I allow for when choosing a UPS? And how much for a DP?

    Leggy.
  • I tend to error on the side of caution, so if it were me, I would use the written spec as a guide so I have some cushion. 200w for DP8K.

    Hope this helps.
  • srautanesrautane Registered User, Hog Beta
    edited January 2015
    I'm running my to DPs (2pcs) on a APC 1200 RS UPS. Info panel says that currently they are drawing 60W@230V
  • LeggyLeggy Registered User, Hog Beta
    Thanks guys.
    We did a test the other day and the Hog 4 was drawing 110w. I'm going to allow 150w per console, plus two DPs, and I have an 850w UPS so all is good.
Sign In or Register to comment.