Bug: Changing Pages Stomps 'Persist on Overide'

ShrunkenNedShrunkenNed Registered User, Hog Beta
Full Boar 4, v2.1.1 b556

Came across this behavior:

Page 1:

Master 10 List 1/1 Intensity and Color in Cue (SHOW LOOK)
HTP and 'Persist on Override' options selected
Priority 0
Master UP

Master 4 List 4/1 Intensity and Color in Cue (VIDEO LOOK Overide)
Fader - IPCB crossfade
Priority 20
Master Up (so now this is active with master 10 persisting in background)


CHANGE PAGE to Page 2. (Blank)

Don't do anything.

CHANGE PAGE back Page 1.

Bring down Master 4
Master 10 has been stomped.
Same with both User Pref Page Change Options "Leave in Background', and 'Holdover if Active'

Priorities Maintain as expected if Fader 4 is not up on Page Changes.

Comments

  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited February 2014
    Hello Scott,

    What fixtures are you testing with?
  • ShrunkenNedShrunkenNed Registered User, Hog Beta
    edited February 2014
    Generic RGB LED
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited February 2014
    Okay, I think you just ran into an edge case.

    I just tested with slots and all was good.

    I tested using IR, IB and IG and all was good.

    Using an intensity and then the CMY encoders I was able to recreate the color being released but the intensity remained because of the HTP.

    Can you please confirm this is also what you are seeing?
  • ShrunkenNedShrunkenNed Registered User, Hog Beta
    edited February 2014
    Correct, Intensity remained because of HTP, color was released.

    I was doing this using HSI,

    I believe this stomping behavior exists only if the bottom priority fader fixtures mix colors using HSI. Using CMY, the priority maintains.

    Confirmed this using VL3500 Spots as well. Once HSI parameters are introduced, the lowest priority fader is stomped on ALL parameters, not just color
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited February 2014
    I also noticed that is occurs with completely stomped list.
    Thanks for the information, I will be getting a defect open for this.
Sign In or Register to comment.