Mac Aura White LEDs Always On

NJ Music LoverNJ Music Lover Registered User
Is there a way to edit the fixture so that the White LEDs on the Aura aren't controlled by the overall intensity. I would like to have individual control over all four colors with the encoders. I also would like the color mixing engine to be RGBW instead of CMY with a white.

Comments

  • CazzumCazzum Registered User
    edited February 2014
    are you running the two Mac Aura Standard & Mac Aura FXs fixture profiles?

    Im using Mac Aura's and have no such difficulty using them in extended mode with the two Profiles
  • MLorenzMLorenz Registered User, Hog Beta
    edited February 2014
    Also used Auras without any issues...
    RGBW will only be available when you use intensity.

    The realworld-parameters of HOG OS are always layed out to CMY, this gives you the best result when you need to use the change type option. Thats why it is CMY with a white.
  • NJ Music LoverNJ Music Lover Registered User
    edited February 2014
    I am using the Auras in extended mode and they are working fine with the two profiles. I just don't like how the Auras turn on the white LEDs when I apply an intensity value to the fixture.
  • rosswillrosswill Registered User, Hog Beta
    edited February 2014
    Just a note to say you can change the colour mode of these fixtures from the desk. Can't remember if this affects the white but suspect it may as it adjusts the white balance of the fixture.

    Maybe this will help?

    Regards

    Ross
  • MLorenzMLorenz Registered User, Hog Beta
    edited February 2014
    Ross, this what I have thought as well. And if I remember correct it will affect the white.
    Under control mode you can find: colour raw and colour cal. This needs to be selected for about 2-3 seconds to change
Sign In or Register to comment.