DL2 Problem with pan cue

jmllr13jmllr13 Registered User
edited November 2013 in DL.3/DL.2
I have a problem I need help with. I am using two DL2 and the D-Pro software. I have written 3 cues that are all the same except 1 and 3 have the intensity out and 2 the intensity is at full. All of the other attributes are the same and do not change (my color, the rotation, the media, etc) My problem is the light is not coming up instead the head pans in every cue as if it is trying to go to the position but realizes it is already there. What would cause this problem? The dmx output says the only thing that is moving is the intensity and the patch is correct. I am at a lost.

Thank you,
Johanna

Comments

  • Marty PostmaMarty Postma Registered User
    edited November 2013
    I'm not familiar with the D-Pro software, but from your description it does indeed seem as if there is a Pan crossfade happening somewhere. Is this software HTP or LTP based?

    How are you viewing the DMX? From the console? From the DL?

    If you have a piece of DMX test equipment to verify that the console is in fact not changing the Pan values as it is crossfading the Intensity that will help you narrow down the issue.

    Hope this helps. :)
Sign In or Register to comment.