Options
Related

HOG 4 Working with ETC

Recently was in a space that used NET3 Two Port Gateway. Is the only thing I need to do to hook into their system is plug a cat5 in the fixture slot on the board and patch what universe I want the equipment in?

Secondly, Power for moving lights going through a Unison Echo Relay Panel to turn all the moving lights on. They have an Avolites Diamond 4 that is already programmed to turn them on and when I plug in they have to turn the panel on to manual and flip all the individual breakers to on and off. Can I turn them to a non dim and put at 100% and Park?

Here are the links for the two products they have.

www.etcconnect.com/product.ov....aspx?Id=22137
www.etcconnect.com/product.ov....aspx?ID=20094

Let me know.
  • 0
    Depends on the software version of the Net3 node. Net3 node doesn't speak artnet, and they enabled sACN in a later software release. You'll have to output sACN from the hog, which requires knowing their ethernet address range. (usually 10.101.x.x for ETC nodes) Also requires knowing which universe on sACN they are listeneing to. If you have access to the racks and can look at the nodes they should say it on the screens. Otherwise download ETC NCE (Network Configuration Editor) as it can pull the information from the nodes if you don't have physical access.

www.etcconnect.com