› ›

No Fixture Net output

LEn-OperatorLEn-Operator Registered User, Hog Beta
edited August 2013 in Wholehog 3 General Discussion
Hi Guys!

I just updated my RHFB to v3.2.6 and now the fixturenet adapter isn´t working anymore...
I thought there was something you should do to get it active.. But I couldn´t remember what to do!
So please help!!

Greetz,

Len

Comments

  • MLorenzMLorenz Registered User, Hog Beta
    edited August 2013
    Are the lights at the port on when you connect a device?
    Have you tried to do a full install again?
    Also when changing IP-Adress of the Fixture-Link port I do a reboot.
    After changing Artnet Settings lik subnet and universe I restart the DP8k Process
  • LEn-OperatorLEn-Operator Registered User, Hog Beta
    edited August 2013
    Hi Marc,

    The funny thing is I did a clean install and it still would not work.
    Then I opened the RHFB console bypassed the Ethercon printboard and plugged in directly on the MB and it worked.
    The next day we tested the internal cable, wich was still good. So we plugged everything back and it worked.
    Only the lights are not lighting up as they should but it is working again!!

    Thnx Lennart
  • MLorenzMLorenz Registered User, Hog Beta
    edited August 2013
    Crazy....
Sign In or Register to comment.