Robe DLX'a

I have 4 Robe DLX's (2 connected on DMX and 2 over Art Net) I have control of pan and tilt. I can not make them Output light. :dunno:
Anyone have issues with this? Any Idea's?
Anyone have issues with this? Any Idea's?
Comments
The RGB channels are shown as CMY in the manual. And so is the library build. But in the standard Mode mode of the fixture (RGBW) this gives inverted colour values. Might be your problem.
So there are 2 options:
* change the Mode at the fixture to CMY Mode (you will loose the white LEDs then, has nothing to do with the console)
* open the DLX lib in the fixture builder, invert the cmy channels so that they are now 65523>0 and not 0>65535
And also check that the right mode is set at the DLX
Thanks
Most of times when pan & tilt is working you have the wrong mode set at the fixtures
The DMX charts start always with pan& tilt for ROBE Fixtures.
Like mentioned above, the manual is leading in the wrong direction naming the RGB channels CMY
I made a custom fixture based on the original fixture and inverted the values for CMY, then all was good.
It is already reported to HES and should be fixed within th next update of the lib