BUG? Manualy setting buddy-size starting with 1.

Actually...same with "repeat"...just tried with HOGpc

Buddying of 1 makes no sense... Thats buddying off...
So buddying of 2 will select 2 fixtures which are in the selction next to each other to do the same, 3 the same for 3 and so on....

You missunderstood....
I want to type in "100" for example.

any thoughts??

I might have an idea, when you try to type it in manually the console might see only the 1 and might take this "as buddying off"

Have you tried to use the arrows to set it to 10?

The soft arrows beside of the tile is not a problem. But if i want to set the buddysize to 100 i cannot push the arrow a hundred times;)

Looking in version 1.1.3, I do see problems entering anything beginning with 1. As a work around, when first looking it will say NO BUDDYING. Press the up arrow one time it will show BUDDY SIZE 2. Manually enter 99 and then press the arrow one time if you need Buddy size 100. You can also do this with 999 & 1000, and 9999 & 10,000 etc. for the smaller shows out there. If you need Buddy size 1500 or 15,000, you can enter 999 or 9999 and then press the arrow one time to get to 1000 or 10,000. Click and highlight the 0's then type in 500 for 1500 or 5000 for 15,000.

Now for the easy way if you are using a Hog 4 or Full Boar 4 console, use the wheel around the trackball, Highlight the Buddy text and rotate the wheel, you can get anything you want.

Should also work with the ring if you use supported Kensington Trackball on a Roadhog4?!