Road Hog 4 External Touch screen driver

supermulssupermuls Registered User
Hi,
I'm abount to ad an external touch screen monitor to my RH4.

Do these instructions still apply:

**Note: In order to use an external monitor on the Road Hog, you will need the USB to VGA adaptor or do I need to plug in the VGA to the VGA port and STILL the USB for the touch screen driver and functionality?

How do I get the driver into the RH4? Download for www, put on USB flash and what?

Comments

  • Marty PostmaMarty Postma Registered User
    edited March 2013
    RH4 has an external monitor port built in (unlike RH3).
    You can choose to use either the DVI or the VGA ports on the desk (but not both simultaneously).
    You will also need to connect the USB for the screen to handle touch events.

    Hope this helps. :)
  • supermulssupermuls Registered User
    edited March 2013
    So I just purchased a 22" ELO 2201L 22" 2201L 1920 x 1080 1000:1 Widescreen Intellitouch Plus USB Controller http://amzn.com/B005GKSBTG after have been told that the Road Hog 4 comes with ELO Touch Screen Drivers installed. I plugged it all in, nothing. I restarted and the screens came up. Attempted to calibrate the screens and the external ELO is responsive to touch not install the driver or recognize anything then I plugged in the USB?
    What now?
  • MLorenzMLorenz Registered User, Hog Beta
    edited March 2013
    Might be that this modell ist not working....
    In the manual you can find a list of supported modells, the one you mentioned is not listed.
  • supermulssupermuls Registered User
    edited March 2013
    MLorenz wrote: »
    Might be that this modell ist not working....
    In the manual you can find a list of supported modells, the one you mentioned is not listed.
    Yea, I called HES today. It's not supported yet.
    I put in a request of support for it. It will be a while but will likely be added in a future software update...
Sign In or Register to comment.