Hog IPC not recognising network adapter

Hi Folks,
Quick Q regarding one of our IPCs, I've just (belatedly) updated them all to V3.2.6, however one of them is failing to recognise the network adapter. It may have been doing this prior to the update, but I can't say I checked.

I'm going to try a Full restore with a new XPe image, but can any of you recommend anything I could try in the meanwhile? I have no CD's in the office and won't until tomorrow AM

Cheers folks!

0 marc lorenz over 11 years ago

XPe Image with Full Install is the thing to try...
You can make a USB Stick to do the upgrade as well!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 11 years ago

[QUOTE=MLorenz;65611]You can make a USB Stick to do the upgrade as well!

iPC can only be re-imaged via CD.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marc lorenz over 11 years ago

Thanks for that Marty....
RTFM ;-)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 dave_mcc - Former HES Forum Member over 11 years ago

Reimage sorted it, thought it would! Didn't now if there was anything else that could have been causing the problem though, cheers guys!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 dave_mcc - Former HES Forum Member over 11 years ago

Update: It didn't sort it, well, not for long. It worked when I left it after the re-image, and now we're back to the original issue. Greyed out network control panel, no network connectivity etc. Running V3.2.6

Any suggestions?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 mitch - Former HES Forum Member over 11 years ago

You may try checking the BIOS setting if still having this problem. The battery may have failed causing the default settings to be active.
www.flyingpig.com/support/hog3/documents/TechNotes.shtml
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel