FB Phantom 3rd Screen

Buzz313thBuzz313th Registered User
Fb4 build b321 no ext screens only USB device is a keyboard.

I noticed when moving windows within screens that windows will disappear to a phantom 3rd screen after cycling through the internal twp screens. So to fully cycle the two internal touchscreens of the FB4 requires three move commands.

I can only assume its because the H4 software is associated with the 3rd internal touchscreen on the console.

When I first received the desk, this threw me for a loop as bringing up the help window did not bring up a window and I thought it was a bug until I realized that the help window was living on the phantom screen.

Is the above, normal behavior for the FB?

Comments

  • nathanfoytnathanfoyt Registered User, HES Staff
    edited January 2013
    Yes this a known issue. This is not related to the Hog4 center screen. This behavior occurs because the Full Boar uses a 4 output video card which has 3 outputs that are always active. This makes it difficult to determine in software which outputs are the correct outputs to use. We are working on resolving this issue.
  • Buzz313thBuzz313th Registered User
    edited January 2013
    Thank you Nathan for the reply.
  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited January 2013
    Yesterday's v1.1.0 release should resolve this problem for you.
  • Buzz313thBuzz313th Registered User
    edited January 2013
    Thanks Chris!

    As soon as I get a chance I will upgrade My desks..

    JB
Sign In or Register to comment.