OSC Interface for Control App (Android + iOS)

I've written a fairly basic Hog-4 OSC interface in JSON for the "Control" app which is available on both the Android and iOS platforms.

Once you have Control installed:
- add an Interface by pointing it to:

www.retinalresonance.com/H4OSC.js

- then make sure you set a "destination" in Control that matches your console's IP and Port settings for OSC in. (ie: 172.31.0.1:7001)

Note that currently this only goes one way...device to console. Console to device messages (such as LED status, etc.) is not yet implemented by me for this.

I have had no success in testing this myself as I have been unable to get OSC in to H4PC due some network oddities on my end, but apparently others have used it successfully.

I designed the layout for a Samsung Galaxy Note 2 (love the stylus on it for things like this!:headbang:), so you may see slight variations in the layout between different devices.

I'm hoping you all have better success connecting and using this. Please report any issues back to me so I can adjust for them if possible.

Enjoy!

0 barnes2000 - Former HES Forum Member over 11 years ago

Thanks Marty.
I'm curious though, is the Hog4 Layout that HES provided suppose to give us LED and fader feedback to and from the device? I have successfully connected the OSC Touch app to my Hog4 but I am trying to figure out how to get the LEDs and the faders to respond.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 11 years ago

To get LED status, etc back into your device, you need to be sure that you have configured your OSC Out settings on the console as well as OSC In.

The Console's Output IP and Port settings need to match those for input on your OSC device.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 11 years ago

Hey Marty,
not sure if you've encountered any problems or have any insight, When i download your template it instantly sends "control" into landscape only mode ??? I've tried on two devices a Google Nexus 7 and a samsung galaxy 2x with the same results. it also wont load any other templates, any thoughts?

kurtis
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 11 years ago

I wrote the interface to be in landscape, and I have seen Control do spme odd things when switching. Usually I close the app and restart it. Sometimes I have to launch one of the example interfaces in Portrait mode, then back out to the main screen and launch the H4OSC interface.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 11 years ago

Worked like a charm, thank you sir
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 11 years ago

It worked like a charm, execept the enter key does not does not seem to function for me? anyone else have the same??

kurtis
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 chris davis over 11 years ago

[QUOTE=kurtiswilk;63999]It worked like a charm, execept the enter key does not does not seem to function for me? anyone else have the same??

kurtis

I have a copy of Marty's template, there is an error:
[CODE]
"address": "/hog/hardware/Enter",
[/CODE]

needs to be:
[CODE]
"address": "/hog/hardware/enter",
[/CODE]
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 11 years ago

[QUOTE=datadriver;64000]I have a copy of Marty's template, there is an error:
[CODE]
"address": "/hog/hardware/Enter",
[/CODE]needs to be:
[CODE]
"address": "/hog/hardware/enter",
[/CODE]

Thanks for the find guys! :eek:
This is now fixed!
Please delete the old interface and download the adjusted one.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 colin wood over 11 years ago

Hi Marty,

Could you post a screenshot of your layout please?

Cheers

Colin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 11 years ago

[QUOTE=Firewood1;64013]Could you post a screenshot of your layout please?

Sure, see attached shots.

It is modeled after the Touch OSC inteface, only I kept it monochrome for better visibility in high ambient light situations.
The only other major difference is I have not yet written in LED status feedback from the console yet.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel