Road hog 4 info

F250770F250770 Registered User
Hi,
I have to know some info about the Road Hog 4...

I see that there isn't the trackball on board ... it's possible to use an external usb trackball? HES have a specific one?

For my work I need 12 dmx output ... I see that the console have 4 on board and up to 8 universes of DMX 512 over ArtNet or sACN ....
with a console + dp8000 I can use 12 DMx output? (4x internal e 8x dp8000)?? or more?

How many external touch screen can I use? HES have specific one?

Thanks
:):):)

Comments

  • stephlightstephlight Registered User
    edited November 2012
    RoadHog 4 have 8 DMX universes, 4 onboard.If you need more you can use DP 8000 (16 DMX universes, 8 physical output)

    You can plug an external usb trackball that can be used as mouse, but I don't see how to use it for Pan and tilt.

    You can use 1 external touch screens, from elo touch, references are in the section 3.1.8 p53 of the hog 4 manual.

    Hope this help
  • barnes2000barnes2000 Registered User, Hog Beta
    edited November 2012
    Roadhog4 can have one external monitor or touchscreen. It also has Hognet , which allows you to add a DP8K.
  • LeggyLeggy Registered User, Hog Beta
    edited November 2012
    So I assume you can use any brand of artnet>dmx node to get 8 universes?
  • F250770F250770 Registered User
    edited November 2012
    I love the trackball and not the mouse because the Track don't need space for movement...

    BUT move Pan and Tilt with the ext track will be very nice:) or improve the Trackball on the Touch screen.....
  • hagberg.dkhagberg.dk Registered User
    edited November 2012
    Is it possible to use a Super Widget on a Roadhog 4...(?)
  • Marty PostmaMarty Postma Registered User
    edited November 2012
    hagberg.dk wrote: »
    Is it possible to use a Super Widget on a Roadhog 4...(?)

    Yes. Unlike the Roadhog3, the Roadhog4 is expandable.

    Hope this helps. :)
  • F250770F250770 Registered User
    edited November 2012
    May I use the Hog3pc or Road Hog programming wing with the Road Hog4 ?
    and the programmer wing trackball is working with the Road Hog4?
    Thanks
  • MLorenzMLorenz Registered User, Hog Beta
    edited November 2012
    F250770 wrote: »
    May I use the Hog3pc or Road Hog programming wing with the Road Hog4 ?
    and the programmer wing trackball is working with the Road Hog4?
    Thanks

    Good question!!!
    The wings are working with HOG PC in Nano Mode, which is the same layout like the Roahog.
    So probably it should work

    But for a 100% correct answer some HES Stuff needs to answer this
  • F250770F250770 Registered User
    edited January 2013
    External Trackball Support
    The Hog 4, Full Boar 4, and Road Hog 4 consoles now support the following external USB
    trackball devices as native console trackballs:
    Kensington SlimBlade Trackball (Model K72327US)
    Kensington Expert Mouse (Model K64325)
    Kensington Orbit Wireless Mobile Trackball (Model K72352US)
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited February 2013
    Hello

    Yes if you hook up an H3 programming wing to a RH4 and put the wing the 'POS' mode you can use the trackball on the wing to positon the lights.
    As was stated in the above post we now fully support the following 3 external trackballs.

    - Kensington SlimBlade Trackball (Model K72327US)
    - Kensington Expert Mouse (Model K64325)
    - Kensington Orbit Wireless Mobile Trackball (Model K72352US)
  • kurtiswilkkurtiswilk Registered User
    edited February 2013
    Im assuming the trackballs selected were chosen because they have 4 buttons, just like the normal console. Native support to me would mean that the Four buttons can be set just like the consoles. A prime example is the expert.
    Kensington Expert Mouse (Model K64325)

    Edit to fix image

    $(KGrHqN,!nkF!G4j3m!bBQIcF(HWvQ~~60_35.JPG
Sign In or Register to comment.