Fixture link on the DP-8000 Going bad?

I've had situations where the DP8K appears to be running but after I had made changes to fixture net settings had actually partly crashed and was outputting hard DMX but not artnet...

A hard reset fixed it....

When you plug it in, does it give you a link light on both the DP and the Switch it's connected to?

On the DP's front panel, if you go to "Network" : "Fixture" does it show you a valid MAC address and IP address?

Hi,
Wonder if anything like my thread here is relevant.
forums.highend.com/showthread.php?t=13166

Best C

Sometimes when changing the Fixture Link and Artnet settings the console needs to be rebooted for it to take affect.

Hi all-

Sorry its taken me a bit to get back to this, another project popped up that pulled me away from this.

A few power cycles didn't seem to help the issue. I tried doing a firmware installation from a hog and that didn't seem to work either.

The last thing I tried was doing a firmware reinstall from a bootable USB drive that seemed to have fixed the issue. Just plain weird...

Thanks for all your help!