merging fixtures from uncommon library

Hi Tim,
On Hog III PC i would open your show that has the VL2500's in it,
-Press setup(On the bottom of the righthand screen the toolbar will change)
-Press shows Merge Shows
-Press Next
-On the Next Screen(source location)In the drop down menu at the top Locate the uncommon folder>so Hog PC>libraries>Uncommon
-Select the uncommon folder,press next
-Move down to Elation manufacturer,and open and you will find your fixture,select the fixture by ticking the Box and hit next.
-The fixture will merge into your current show.

If i were you i would make a backup or two of your current show before attemting to mege any files.
hope this helps in some way.

Best C

Tom,

Any reason you wouldn't use the Generic RGB library for the ELARs? That what I use when I have the ELAR 108's and works like a charm. I don't use any of the advanced items within the fixture as I prefer to make all those myself.

Just a thought...

Thanks guys,

John I currently am trying to use the 9ch file, but thanks for the heads up if I choose to use them in 4 ch mode. I assume you meant you find a generic RGBW file to use....not RGB since they are 4 color fixtures

Thanks again

Yup...my fat fingers missed the W. :D