Clay Paky Alpha Spot 1200

cormacjackcormacjack Registered User, DL Beta
Hi,
Does anyone know which mode the clay Paky alpha spot 1200 fixture should be set to to work correctly with the current fixture profile available.
The fixture patch requires 23 DMX channels but the manual for the fixture is suggesting either stnd,16B or extended mode none of which are 23 channel with a few options that can be switched on or off in the fixture.
Don't currently have the fixture so cannot test.

Regards C

Comments

  • Marty PostmaMarty Postma Registered User
    edited March 2012
    Hey Cormac,

    I believe the standard 16 bit mode is what you are looking for (middle column) with the (x4) timing channels @ the end "turned off" (looks like the Vector or Vect mode should be set to OFF).

    Also be aware there is a substantial difference between the Alpha Spot 1200 and the Alpha Spot 1200 HPE, so you may want to confirm the exact model you will be using.

    Hope this helps. :)
  • cormacjackcormacjack Registered User, DL Beta
    edited March 2012
    Thanks Marty,
  • maikelmaikel Registered User
    edited March 2012
    Alpha Spot 1200

    hi cormacjack

    also look in the uncommon libary
    ther are more versions

    thumbs up maikel
Sign In or Register to comment.