Intellaspot Frame Tables

thomash35thomash35 Registered User
edited December 2011 in HES Automated Lighting
I am in need of the frame tables/DMX Values for the Intellaspot. I am working on a grandMA and have begun to doubt the accuracy of the fixture profile I am using. I know how the 39-channels lay out what I don't know is what DMX value I need to set Control to in order to get the fixture to Lamp ON. Or what DMX value Gobo 1 need to be set to in order to get Slot 3.

Normally, with Vari*Lite or Martin, I could just refer to the user manual to get said DMX values but not so with this fixture.

Thank you in advance for your assistance.

TH

Comments

  • MLorenzMLorenz Registered User, Hog Beta
    edited November 2011
    Have you tried this:
    http://www.highend.com/support/automated_luminaires/TechnospotSupport.asp

    In the manual from page 34 on you will find the DMX-Layout as well as a detailed DMX-Chart (page35-46)
  • bradpepebradpepe Registered User, HES Alumni
    edited November 2011
    thomash35 wrote: »
    I am in need of the frame tables/DMX Values for the Intellaspot. I am working on a grandMA and have begun to doubt the accuracy of the fixture profile I am using. I know how the 39-channels lay out what I don't know is what DMX value I need to set Control to in order to get the fixture to Lamp ON. Or what DMX value Gobo 1 need to be set to in order to get Slot 3.

    Normally, with Vari*Lite or Martin, I could just refer to the user manual to get said DMX values but not so with this fixture.

    Thank you in advance for your assistance.

    TH

    You can find HES approved intellaspot libraries for the GrandMA on MA-Share.net

    thank you,
  • Woodj32177Woodj32177 Registered User
    edited November 2011
    On a associated note Brad,
    Why has HES decided to not include fixture libraries in the manual.
    Seems a very "user unfriendly" thing to do.
  • stephenwykerstephenwyker Registered User, DL Beta, Hog Beta
    edited December 2011
    I asked a while back for the showgun layout and got the same answer. Who knows ... Smile and Nodd ;-)
Sign In or Register to comment.