Add input card on Axon to use the DML inputs

Juay0004Juay0004 Registered User
edited October 2011 in Barco DML-1200
Hi,

Is it possible to add a input card to the Axon on a DML like a normal stand alone Axon server so that the input on the DML chassis can be linked to the Axon.

Comments

  • schiefelsschiefels Registered User, HES Alumni
    edited October 2011
    Hi Ming,

    Are you referring to the SDI input? If so, there should already be an SDI card in the Axon. All DML-1200 units that ship with an Axon media server in them come with an HD SDI input card. The signal loops through the SDI input on the DML-1200, then through the Axon, and back to the "SDI Out" on the DML-1200.

    Select the "SDI" input on the DML-1200 will send the SDI signal straight to the projector. Selecting the "Media Player" input on the DML-1200 and then setting the Axon to Media Folder 255 File 5 will show the SDI signal through the Axon.

    Regards,
  • Juay0004Juay0004 Registered User
    edited October 2011
    Hi Matt,
    I wasn't aware that it was looped. My bad. Can i check with you is the SDI the only input that is looped? or are the rest looped too?
  • schiefelsschiefels Registered User, HES Alumni
    edited October 2011
    Hi Ming,

    Only the SDI input is looped. The Axon only supports SDI capture, so that was the only input that was integrated with the DML-1200 fixture when the two were combined.

    Also, due to the way that the inputs on the DML-1200 are laid out on the circuit boards, the SDI was the only one that could be looped without a complete redesign of the input system.

    Regards,
  • Juay0004Juay0004 Registered User
    edited October 2011
    schiefels wrote: »
    Hi Ming,

    Only the SDI input is looped. The Axon only supports SDI capture, so that was the only input that was integrated with the DML-1200 fixture when the two were combined.

    Also, due to the way that the inputs on the DML-1200 are laid out on the circuit boards, the SDI was the only one that could be looped without a complete redesign of the input system.

    Regards,

    Thanks Matt. That will work for me. Just checking the spec. Great help you've been.:09:
Sign In or Register to comment.