LG Flatron

amir877amir877 Registered User
I try to make the LG Flatron L1742SE-BF 17'' touchscreen work with the Wholehog 3 and the touch don't work.




  • Abbe RPM Digital LightingAbbe RPM Digital Lighting Registered User
    edited May 2011
    Hi Amir,

    That is easy, the Fullboar does not have drivers for it. Please also see:

  • amir877amir877 Registered User
    edited May 2011
    this not good at all...
    we buy 4 of those...
    is there any thing we can do?

  • Marty PostmaMarty Postma Registered User
    edited May 2011
    Return them from where you bought them and buy properly supported screens is really all you can do.
  • Matteopio.olivieriMatteopio.olivieri Registered User
    edited May 2011
    In my opinion, the only way to get it to work is using it as an external monitor to a notebook, using the software ipc, on this 17''are you going to put only two virtual monitor software (with a high resolution should enter both ) While the virtual desk you can keep it on the primary monitor of the notebook.
    that's it!
    Of course, you have a good notebook, with a good video card and a lot of video ram (512MB would be ideal), an excellent network switch 100 t-base, real, then buy a good brand of switch, like Cisco, on ebay you can find it used a little more than 150 € (8port) new around 400euro (I recommend buying a good, otherwise you risk to bring down all the speed communications network node,).

    you can download the software IPC at this link:



Sign In or Register to comment.