Visualizer DP Idle Will Not Connect. "Waiting for node association."

jazzinaljazzinal Registered User
edited September 2011 in Wholehog 3 General Discussion
I'm trying to get Hog 3 PC talking to ESP Vision and have not had any luck for quite some time. I've gone through the connection guides and they've done nothing for me. When launched, the Visualizer DP remains in the Idle Status and the info just says "Waiting for node association" Has anybody else encountered this or have a solution?

Comments

  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited May 2011
    Make sure you have something patched on your console and that the DP net num in your console's patch matched what is mapped in the connectivity window on your visualizer machine.
  • HJS-erHJS-er Registered User
    edited August 2011
    Same problem here.

    Using a IPC version 3.2.1, with a XP Pro SP2 with WYSIWYG R22.
    Latest DP driver, on Port 6600, User number 1.


    Using a crosscable, Unabled all scanners, firewalls, networkproducts.

    Settings for the connection works fine, IPC report: Visualizer: Idle

    Report Visualizer DP: Waiting for node association

    Made a showfile with 10 deskchannels, patched on DP 1, patched aswell at WYSIWYG, but still no response.

    After a few attempts i shut down both, reboot the IPC first, load the showfile. After that i reboot the WYSIWYG PC, no results.

    Has anybody else a solution?
  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited August 2011
    Hit connect in WYSWYG's device manager which is under the live menu.
  • HJS-erHJS-er Registered User
    edited September 2011
    Tried it all times, no luck.
  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited September 2011
    Give section 32.3.2 a quick read and double check your settings. I have a feeling you haven't given the console an address in the properties window.

    http://flyingpig.com/support/documents/manual_en062911.pdf
  • HJS-erHJS-er Registered User
    edited September 2011
    Allright, i'll check it in 24 hrs.

    Thank you so far.
Sign In or Register to comment.