swop channels

MaartenMaarten Registered User
Hello,

Is there a function in the Hog3 software to swop channels ?? i couldn't find it anywhere.

thanks

Maarten

Comments

  • Marty PostmaMarty Postma Registered User
    edited April 2011
    Under flash key options select "Solo".

    Hope this helps. :)
  • MaartenMaarten Registered User
    edited April 2011
    Marty, thanks for your reply.
    Could you tell me what the syntax will be for let's say
    change the values from channel 4 to channel 10 in all cues ?


    Thanks Maarten
  • Marty PostmaMarty Postma Registered User
    edited April 2011
    Well if it is simply a Desk Channel, the easiest approach would be to swap the DMX patch for those two channels in Patch.

    To do this in Patch/Fixture Spreadsheet.
    - Select 4 +10
    - press Unpatch
    - select 4 and patch @ former DMX of 10
    - select 10 and patch @ former DMX of 4

    If this is not what you are looking for then you will need to use the COPY command to clone from one to the other.

    You can find more detailed information on how to use COPY in the manual.

    Hope this helps. :)
  • MaartenMaarten Registered User
    edited April 2011
    Great i will try to find out what is possible with the copy function
Sign In or Register to comment.