IPCB Effects Fader will not Play Next Cue

Hello,

When I set a cuelist full of custom and preset effects created from the effects engine to IPCB fader mode I'm unable to play the next cue, it just releases the cuelist or stays on the first cue. I have separate faders for the following parameters for the same fixture type; 1) Intensity and Positions, 2) Colour, 3) Beam, 4) Gobo Rotate (IPCB), 5) Prism Rotate (IPCB), 6) Effects and 7) Other/Spare.

Any help would be greatly appreciated...

Thanks,

0 kevinj.lawson - Former HES Forum Member over 13 years ago

For your IPCB fader go into the master options menu and set the play button to skip forward and the pause button to skip back. This way you can scroll through the cue list and the cue will not go until you move the fader above 0%. Also check to see if you have the option "Reset on Release" in the cuelist options menu deactivated otherwise every time you pull down the IPCB fader the cuelist will reset to cue 1.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 meh 626 - Former HES Forum Member over 13 years ago

Fantastic it worked! Thanks for your help.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 amir877 - Former HES Forum Member over 13 years ago

OMG!!! kevin.....
I worked with hog for 10 years and didn't know that
Looking for this option for 10 f**king years !!!!
Always think thats a bug.
And thank you steve for bringing it up.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 rautasami over 13 years ago

and during the years of Hog2 I used choose+play or pause to skip...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel