triggering cuelists

xxmaxxttxxxxmaxxttxx Registered User
i have a cuelist(list1) with 2 cues that change position so cue 1 is position 1 cue to is position 2 with a 5 sec fade from 1-2 and i want to trigger that cuelist using my main cuelist(list2) that is running the timecode.

in cue 2 of the timecode cuelist i have the same lights in a position. in cue 3 i want list 1 to run, but i also want cue4 to run simultaneously while list 1 continues but when i do that cuelist 1 stops running as soon as cue4 is triggered.

any suggestions?

Cuelist 1
Cue 1 - Position 1 - 5sec fade
Cue 2 - Position 2 - 5sec fade

Cuelist 2
Cue 1 - Enables TC
1:24 Cue 2 - Position 0 for the same lights in List 1
1:27 Cue 3 - GL1
1:33 Cue 4 - Led Full

when the cue at 1:33 executes list 1 releases..
is it something with tracking maybe?


  • Abbe RPM Digital LightingAbbe RPM Digital Lighting Registered User
    edited February 2011

    Any cuelist can be set to "release on other go", check that in options.
  • bradpepebradpepe Registered User, HES Alumni
    edited February 2011

    It sounds like List 1 is getting stomped by List 2. I suggest that you enable "persist on override" on List 1 to ensure that it is not released by stomping.
  • SfeerPeerSfeerPeer Registered User
    edited February 2011
    or make also a go for 0-position:

    quelist 1:
    q1 = pos 0 fade in ?? sec
    q2 = pos 1 fade in 5sec
    q3 = pos 2 fade in 5sec

    then in quelist 2:
    1:24 que2 = macro GL1/1
    1:27 que3 = macro GL1/2

    in this way there's no position-info in list 2
  • xxmaxxttxxxxmaxxttxx Registered User
    edited February 2011
    Thanks for the help I got it to do what I needed it to do using persist on override
Sign In or Register to comment.