DL3 Layer Issues

BrianSDavisBrianSDavis Registered User
edited November 2010 in DL.3/DL.2
Howdy.

Couple of things. 4 DL3's. 4 graphic layers. Collaged in a 4 x 1.

Cue 1 Graphic Layer 1 intensity at full time 3.
Cue 2 Graphic Layer 1 Intensity to zero Graphic Layer 2 Intensity to full time 3.
Cue 3 Graphic Layer 1 Intensity to full, Graphic layer 2 intensity to 0 time 3.

Fixtures 1 thru 3 appear to work normally. Having issues with the fourth fixture where rather than fading smoothly from layer to layer, going from layer 2 to layer 1 occurs with a snap out in Layer 2 and a fade in on layer 1. I've tried changing the time on the Intensity of Layer 2 only, to no avail. Any thoughts? I just ran through every parameter, and other than telling which figure should be which in the collage, everything for Fixtures 1 through 3 match the values for Fixtures 4, so shouldn't they all be behaving similarly?

Comments

  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited November 2010
    Hey Brian,

    Double check the paths in your programming, especially on that second cue where you are seeing the snap fade.
Sign In or Register to comment.