Axon networking issue

jxgriffijxgriffi Registered User, DL Beta, Hog Beta
edited November 2010 in Axon
Running 2.0.1 b2437 on my Axon and it has been running fine with no problems.

Today, I came in and couldn't get an image. I tried opening the CMA locally on the Axon and saw in the bottom right corner that the IP address is 0.0.0.0. It's on a network with a DHCP server (which is working and verified this with my laptop getting an IP from it). It's not defaulting to the 192.168.x.x like there isn't a server.

I tried rebooting from the Axon splash screen, resetting from the red button on the server and finally a hard reset on the system with the power button.

I am seeing both Green and Amber led's on the network port on the back of the unit.

Any ideas????

I'm going to try dropping the network line and upgrading the software and see if that helps.

Comments

  • SBlairSBlair Registered User, HES Alumni
    edited November 2010
    Jon,

    Try going into the BIOS and running a Load Setup Defaults for the server. When the BIOS battery dies it sometimes enables the 2nd NIC which can cause issues.
  • jxgriffijxgriffi Registered User, DL Beta, Hog Beta
    edited November 2010
    Thanks Scott...I'll give it a shot when I'm back in on Friday.
Sign In or Register to comment.