Midi HogPC III 3.1.7.2826

TofioTofio Registered User
Hi,
You've finally developed the midi functions !
Thank you very much, I look and test it when I have time.
Cordially


Christophe.

Comments

  • hercthxhercthx Registered User
    edited September 2010
    what midi device would work best for this feature to handle both playback and programing tracking?
  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited September 2010
    For Hog3PC midi I/O I recommend the MAudio 1x1 but there are several USB midi devices out there. As for midi controllers that send midi notes, you can't go wrong with a midi keyboard but again there are midi note software applications for your desktop out there as well.
  • TofioTofio Registered User
    edited September 2010
    Hello the HES team!

    The midi commands works well it's great !

    I used midiOx to map the different channels to my SL25 Novation,

    I have one question,
    how can I do to control the faders and if possible the wheels? thank you in advance

    Best regard
    Christophe.
  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited September 2010
    Fader and wheel control is currently not available through midi control.
  • TofioTofio Registered User
    edited September 2010
    Hi Chris,

    Thank you for your answer,
    I'll wait a little longer ;) for the midi control of faders and wheels.

    At soon.
    Christophe.
  • oscaroscar Registered User
    edited September 2010
    Hi, i have doubts as to how to install my device of midi notes, already try put to work and nothing, i have a console Beheringer BCF2000 and communicates in a midi by means of USB, at least so and done in programs of illumination and audio, ojala anyone could help...thank you

    google traslate
  • ncatmurncatmur Registered User
    edited December 2010
    Dear All,

    I have a m Audio Usb Uno and I'm desparately to make it work on my windows 7 64-bit PC. I says it sees it but I can't get timecode it. I set all the relevant boxes as I would on the Full Boar but to no luck. Am I being really stupid. I need to get it working as my back up for a big timecoded show. Thought it should work.

    Best wishes,

    Nigel.
  • Marty PostmaMarty Postma Registered User
    edited December 2010
    ncatmur;51157 said:
    Dear All,

    I have a m Audio Usb Uno and I'm desparately to make it work on my windows 7 64-bit PC. I says it sees it but I can't get timecode it. I set all the relevant boxes as I would on the Full Boar but to no luck. Am I being really stupid. I need to get it working as my back up for a big timecoded show. Thought it should work.

    Best wishes,

    Nigel.

    What are you trying to do with this? Are you trying to get LTC into H3PC? If so the only way to do this is with an LTC widget.

    The only 3rd party hardware that will allow you to input timecode would be a MIDI device for MIDI TC.

    Hope this helps. :)
  • ncatmurncatmur Registered User
    edited December 2010
    Thanks. I got there in the end. Just a driver update from the M-Audio website. Works like a dream and sits there mirroring the main desk in the event.

    Nigel
  • snowmaniac153snowmaniac153 Registered User
    edited May 2011
    does anyone use midi note software applications for your desktop (pc)? if so what are you using?? I am contemplating that or rocking a Midi keyboard. What keyboard are people using? what seems to work well?
  • LightingBoyLightingBoy Registered User
    Hello Everyone!

    I set on the basis of the supplied images HOG3Pc the driver to be controlled by a Korg NanaKonrtol2 MIDI controller, but for some reason can not control.
    My question: What could be the problem.
    Each would be asked to help because it would be very important.
    Thanks in advance.

    https://drive.google.com/file/d/0B1gqaqXxXyMlNGZEd2JaTWduUnc/view?usp=sharing


Sign In or Register to comment.