DP2000 Issue

Hi all,
I had the HogIII connected through a twisted cable to 1 DP2000 when suddenly it stopped Working and the following problem came out on the DP's LCD:
Flash image invalid
Initializing network...
Host address 172.31.255.254
Subnetmak: 255.255.0.0
Unable to find software server
Beginning software reload sequence
Seeking software server on port -20803 74784...

and nothing happens.

the software version on the consolle is v3.1.6 (b2773)
It worked fine during the last 2 weeks. I only had 1 MAC2000 and 1 Studio Beam patched on it.
Any suggestions are appreciated.... :-)
Thank you very much!
Lorenzo

0 Chris Muenchow over 13 years ago

While powering on the DP2000 hold down all three buttons on the front panel of the DP and wait a second or two and then release. This should help the DP to download its software from the console. Make sure when doing this the console is set to enable dhcp and boot server and also check that the use custom address range box is unchecked.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 lored - Former HES Forum Member over 13 years ago

Yeah:headbang:, thank you very much Chris!! that solved the problem! :notworthy:
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel