jands hog 500

danowells · November 8th, 2010

can you use shape create in a jands hog 500
thanks dano

Tanner · September 1st, 2011

You can use it to create effects for the Hog, not specifically use in it. You will have to first create the effect on a PC where then you can save it onto you show floppy. Open it up and I am not exactly sure the file name but put that effects text file. Save it and load that show on the Hog. I think it should work... I have never done it. But I am guessing that it is similar to adding a new library file. I also think you might have to export it to some other software.. FX gen or something like that.

November 8th, 2010	#1
danowells dano Newly Registered Member Join Date: Apr 2009 Posts: 6	jands hog 500 can you use shape create in a jands hog 500 thanks dano

September 1st, 2011	#2
Tanner Tanner Member Join Date: May 2009 Location: Sumner Posts: 29	You can use it to create effects for the Hog, not specifically use in it. You will have to first create the effect on a PC where then you can save it onto you show floppy. Open it up and I am not exactly sure the file name but put that effects text file. Save it and load that show on the Hog. I think it should work... I have never done it. But I am guessing that it is similar to adding a new library file. I also think you might have to export it to some other software.. FX gen or something like that. __________________ Tanner Harrison Light Programmer/OP tanner@austintaylorproductions.com http://www.atproductions.biz/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ok Here is a Tough One.... I Think ... Jands Event 408/416	__Mystic__	Wholehog 2 Operating Systems	3	April 20th, 2008 12:36 PM
2 questions jands hog 500	Aether	Wholehog 2 Operating Systems	3	July 24th, 2007 06:25 PM
JANDS hog500	Tierchen	Wholehog 2 Operating Systems	0	February 22nd, 2007 03:00 PM