 |
|
|
|
 |
|
|||||||
| DL.3/DL.2 Tips and Tricks Share the techniques you use to make your DL.3 and DL.2 Digital Light fixtures perform successfully. |
 |
|
|
Thread Tools | Display Modes |
June 28th, 2011
|
#1 |
|
Kevin Sorg
Champion Member
Join Date: Jan 2005
Posts: 118
|
DL2 Display Issue
Good day! I have a DL2 that the display was not working correctly.
Another tech replaced the video card and it was working fine for about an hour. Then the display was on but would not display anything at all. You could see the glow, but no info. Now the display is completely blank. Is there a recommended way to test to make sure that the video signal is correct coming from the video card? Any suggestions on where to check power and signal? Thanks and take care! |
|
|
|
July 5th, 2011
|
#2 |
|
Paul Hancock
HES Staff
Join Date: Feb 2005
Location: Austin, TX
Posts: 92
|
Hi Kevin,
If you press any buttons does the screen 'wake-up' and display info? What video card is currently in the unit? Does the fixture have to VIVO connector? you will want to make sure the output to the menu display is in the right connector on the VIVO adapter (with the signal arrow OUT).
__________________
Paul Hancock Product Support Specialist  High End Systems Austin, Texas USA paul_hancock(at)highend.com |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| display | stef | DL.3/DL.2 General Discussion | 2 | October 26th, 2007 09:47 PM |
| DL1 Display | Andris | DL.1 | 1 | November 20th, 2006 04:45 PM |
| DISPLAY | stef | DL.3/DL.2 General Discussion | 1 | November 19th, 2006 06:09 PM |
| Onboard display issue | chrislighthall | DL.3/DL.2 General Discussion | 7 | November 14th, 2006 02:15 PM |
| More detailed value display | barnes2000 | Wholehog 3 General Discussion | 1 | January 27th, 2006 10:01 AM |
Linear Mode
